Model SK-Series Sewage Shredder Pump
Features:
• Our Shredder type pumps leaves solids slightly larger than that of a Grinder pump. Incorporating a tungsten carbide cutting tip on a signie vane impeller causes the Shredding action. This impeller runs against a scored diffuser plate.
• The SK-Series pumps feature non-clog, single vane impellers designed for high volume and lift performance. They are especially suited for handling sewage and industrial waste water. Each pump is tested at thefactory for performance and safety.
Applications:
• Agricultural waste applications.
• Sewage and Industrial waste water.
• Water treatment sludge removal.
• Hospital waste and other corrosive liquids.
Materials:
• The motor casing, rotor shaft and all hardware are made of 304 stainless steel with other exposed parts made of cast iron.
• Motor protection incorporates overload protection against overheating and high amperage.
• Dual mechanical seals in a separate oil-chamber with an oil-seal-ring on the outside.
• Dry motor.
• All SK-models also available with slide rail systems, and also available with float switch and also available in all 316 cast stainless steel.
Performance Curves :
Specifications:
Pump Type Outlet Diameter Inch(mm) Output KW Voltage 50Hz or 60Hz Continuous Cable c*awg*m/ c*mm2*m Weight Max Solids (mm) Head M Capacity L./min Free standing KG SR-Model KG 50Hz 60Hz JS750     SK 2"(50) 0.75 1 Phase 100v ~ 240v 7 250/300 3*14awg*10 30 8 21 21 JS750     SK 3"(80) 0.75 6 200 3*14awg*10 30 24.6 21 21 JS1500   SK 3"(80) 1.5 8 600/550 3*14awg*10 41 24.6 44 40 JST8        SK 2"(50) 0.75 3 Phase 200v ~ 480v 7 250/300 4*1.25*10 28.5 8 21 21 JST8       SK 3"(80) 0.75 6 200 4*1.25*10 28.5 24.6 21 21 JST15     SK 3"(80) 1.5 8 600/550 4*1.25*10 37 24.6 44 40 JST22     SK 3"(80) 2.2 8 800/870 4*2.0*10 47 24.6 44 40 JST37     SK 3"(80)/4"(100) 3.7 10 950/1000 4*2.0*10 52 24.6/38.9 35 44